Nikon 1534 Digital Camera User Manual


 
230 C The Shooting Menu: Shooting Options
A Manual
A Y icon flashes in the viewfinder and 0
flashes in the information display when
Manual is selected and the flash is raised.
A The SB-400 and SB-300
When an optional SB-400 or SB-300 flash unit is attached and turned
on, Flash cntrl for built-in flash changes to Optional flash, allowing
the flash control mode for the optional flash unit to be selected from
TTL and Manual.
A TTL Flash Control
The following types of flash control are supported when a CPU lens is
used in combination with the built-in flash (0 89) or optional flash
units (0 299).
i-TTL Balanced Fill-Flash for Digital SLR: Information from the 420-pixel RGB
sensor is used to adjust flash output for a natural balance between
the main subject and the background.
Standard i-TTL Fill-Flash for Digital SLR: Flash output is adjusted for the
main subject; the brightness of the background is not taken into
account.
Standard i-TTL flash control is used with spot metering or when
selected with the optional flash unit.
i-TTL balanced fill-flash for digital
SLR is used in all other cases.