23Introduction
A Removing Memory Cards
After confirming that the memory card
access lamp is off, turn the camera off, open
the memory card slot cover, and press the
card in to eject it (q).
The card can then be
removed by hand (w).
A The Write Protect Switch
SD memory cards are equipped
with a write protect switch to
prevent accidental loss of data.
When this switch is in the “lock”
position, the memory card can not
be formatted and photos can not
be deleted or recorded (a beep will sound if you attempt to release the
shutter).
To unlock the memory card, slide the switch to the “write”
position.
A A-M, M/A-M, A/M-M, and Vibration Reduction (VR) Switches
When using autofocus with a lens equipped
with an A-M mode switch, slide the switch to
A (if the lens has an M/A-M or A/M-M switch,
select M/A or A/M).
For information on other
lenses that can be used with this camera, see
page 289.
If the lens has a vibration reduction (VR)
switch, select ON to reduce the effects of
vibration (0 355).
Write-protect switch
16
GB