Filter
Top Products
449
4 Press J.
The message shown at right will be
displayed in the monitor and a row
of dashes will appear in the control
panel and viewfinder.
To restore
normal operation without
inspecting the image sensor, turn
the camera off.
5 Raise the mirror.
Press the shutter-release button all
the way down.
The mirror will be
raised and the shutter curtain will
open, revealing the image sensor.
The display in the viewfinder will
turn off and the row of dashes in the
control panel will flash.
6 Examine the image sensor.
Holding the camera so that light falls
on the image sensor, examine the
sensor for dust or lint.
If no foreign
objects are present, proceed to
Step 8.