Filter
Top Products
••••••••••••••••••••••
Check
point
2
Set
the
shutter
speed (30-1/2000 sec.)
with
the
Command
Dial.
3
Compose
picture, confirm
focus
indicator.
and
shoot
.
• When the subject
is
too dark or too bright, one of
the following warning indications will appear
in
the
viewfinder and LCD panel. (Over or underexposure
value
is
indicated with the electronic analog
exposure display
in
the viewfinder.)
• H :: Select higher shutter speed. If the warning
indication still remains on, use
an
NO
filter.
·lo
: Select slower shutter speed. If the warning
indication still remains on, use the
II
Speedlight.
• If the subject
is
too dark or backlit, the flash
recommended indication
~
blinks
in
the viewfinder !
when you lightly press the shutter release button.
~
Use the Speedlight (page 80/92).
is
• If - - (Long Time exposure)
is
selected
in
Manual exposure mode and the
exposure mode
is
changed to Shutter-Priority Auto without canceling - -,
--
blinks and the shutter locks.
To
shoot
in
Shutter-Priority Auto exposure mode,
select shutter speed other
than
- - by rotating the Command Dial.
55