Filter
Top Products
,
--------------
-
-----
--
- - - - -
---
• Notes on using optional Speedlights
•
See
your Speedlight manual for details. If the camera groups are defined
in
the
manual of the Speed light with TTL Auto Flash,
see
the section for camera group
II
.
• Flash sync speed
is
1/90 sec. or slower when using
an
optional Speedlight.
• Available film speeds for TTL Auto Flash are ISO 25 to ISO 800.
• When Red-Eye Reduction or Red-Eye Reduction with Slow Sync
is
set
on
a
camera attached with the SB-28/28DX, 27 or 26, the Red-Eye Reduction lamp of
the Speedlight lights up. With other Speedlights, the Red-Eye Reduction lamp of
the camera body lights up.
• When optional Speedlight with AF-Assist Illuminator, SB-28/28DX,
27,
26
,
25
or
24,
is
attached, the AF-Assist Illuminator of the optional Speedlight emits light
when the focus mode
is
set to
AF,
an
AF
Nikkor lens
is
attached, the subject
is
dark and center focus area is selected or Dynamic
AF
Mode with Closest-Subject
Priority
is
activated. With other optional Speed lights, the AF-Assist Illuminator on
the camera emits light.
• Set the exposure mode to Aperture-Priority Auto or Manual to take flash pictures
with non-TTL flash mode.
• With the SB-26, 25
or
24,
even if Front-Curtain Sync
is
set on the camera body,
the Speedlight performs Rear-Curtain Sync when Rear-Curtain Sync
is
set
on
the
Speed light
in
P, 5, A
or
M exposure mode (camera setting
is
overridden).
In
8 or
Vari-Program (except
!!i), Speedlight performs Front-Curtain Sync even if Rear-
Curtain Sync is set
on
Speed light (Speed light setting
is
overridden).
• With the SB-26, 25
or
24, when Slow Sync is set on the camera body
in
I!:!
, Rear-
Curtain Sync is performed if Rear-Curtain Sync is set on the Speedlight.
• With the SB-26, 25
or
24,
when Red-Eye Reduction or Red-Eye Reduction with
Slow Sync
is
set
on
the camera body, Speedlight performs Red-Eye Reduction or
Red-Eye Reduction with Slow Sync even if Rear-Curtain Sync
is
set
on
the
Speedlight.
•
FE
E
in
the LCD panel and
FE
E and
~
in the viewfinder blink and the shutter
cannot be released when the exposure mode
is
set to P,
~
or Vari-Program and
the attached optional Speedlight
is
not set to TTL Auto Flash. Set the Speedlight
flash mode
to
TTL,
or
set the camera's exposure mode to 5, A or M.
92