Filter
Top Products
•••••••••••••••••••••••
Check
points
3
Compose picture, confirm focus
indicator.
and shoot.
• The first shot is taken and
~
and frame counter
blink
in
the LCD panel when the shutter release
button is fully depressed. The frame counter
in
the
LCD panel does not count up and the film does not
advance and multiple exposures can be taken from
the second shutter release. The multiple exposure
is canceled, film advances and
~
disappears from
the LCD panel when the second shot is taken .
•
To
take more than
two
shots on the same frame,
rotate the Command Dial while pressing the
e
button again after first shot is taken by depressing
the shutter release button and while
~
is blinking
so
~
appears without blinking. Repeat this
operation
as
many times
as
you wish to continue
taking pictures on the same frame.
•
To
cancel multiple exposure, rotate the Command
Dial while pressing the
e button so the display
disappears from the LCD panel. Film
is
advanced
and frame counter counts
up
when the multiple
exposure is canceled before or during multiple
exposure operation.
• Multiple Exposure cannot be performed
in
the 8 (AUTO mode) or Vari-
Program .
• Multiple Exposure and Auto Exposure Bracketing (page
62)
cannot be set
simultaneously.
65