Filter
Top Products
III
---------------------------
This section explains how
to
use the built-in Speedlight set to desired
flash sync mode when a D-
or
G-type
AF
Nikkor lens
is
attached .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
In
P, S, A
or
M
exposure mode
In
8'
or Vari-Program
80
1
In
Auto-Multi Program, Shutter-Priority
Auto, Aperture-Priority Auto or Manual
exposure mode, release the built-in
Speedlight by pressing the
0 flash lock-
release button.
• When the subject is dark or backlit and shutter
release button
is
lightly pressed, the flash
recommended indication
~
blinks
in
the viewfinder
in
Auto-Multi Program, Shutter-Priority Auto,
Aperture-Priority Auto or Manual exposure mode.
•
In
8'
(AUTO mode) or Vari-Program, when the
subject
is
dark or backlit (except
in
~
or
~"':'
\OI
)
and
the shutter release button
is
lightly pressed, AUTO
~
appears
in
the LCD panel and the built-
in
Speedlight automatically pops up .
• When the Speedlight
is
ready to fire,
~
appears
without blinking
in
the viewfinder (when the
camera's meter
is
on)
.
• Press the Speedlight down gently until it clicks into
place to retract it.
2
Set the flash sync mode by rotating the
Command Dial while pressing the
0 flash
sync button.
• Matrix Balanced Fill-Flash
is
selected
in
exposure
modes other than Manual, and
Standard TTL
Flash
is
selected for Manual exposure mode.
See
page
76
for details.
• See the table on pages
83
and 86 for shutter speed
and aperture, available sync mode
in
each
exposure mode.