Filter
Top Products
60
1 SB-R200’s available flash operations
The following flash operations are available with the SB-R200. Refer to the
corresponding pages for details on each flash operation.
*1 The optional TTL Cord SC-30 is required (p. 123).
Note: With CLS-compatible cameras, the TTL Cord SC-30 (optional) is not required.
SB-800’s Commander mode
In the Commander mode, although the SB-800 is set as the Master flash unit and its flash
mode is set to Flash canceled (---), the flash will fire at a reduced flash output level. This may
affect the correct exposure of the subject if the subject is close. To limit this effect as much
as possible, bounce the light by tilting or rotating the SB-800’s flash head.
Available flash operation Usable cameras and Speedlights
Close-up (p. 65) CLS-compatible cameras
Cameras not compatible with CLS
*1
, SU-800
Commander (p. 79) CLS-compatible cameras featuring Commander function or
SU-800, SB-800