Filter
Top Products
57
Features That Can Be Set Using the Multi Selector
Shooting Features
Using Macro Mode
When using macro mode, the camera can focus on subjects as close as 1 cm
(0.4 in.) from the front of the lens.
This feature is useful when taking close-up pictures of flowers and other small
subjects.
1 Press I (p macro mode) on the multi
selector.
2 Press the multi selector H or I to select ON
and press the k button.
• The macro mode icon F is displayed.
• If the k button is not pressed within a few seconds,
the selection will be canceled.
3 Use the zoom buttons to set the zoom ratio to
a position where F and the zoom indicator
light in green.
• How close you can be to the subject when shooting
depends on the zoom ratio.
When the zoom ratio is set to a position where F and the zoom indicator light in
green, the camera can focus on subjects as close as 10 cm (4 in.) from the lens. At the
zoom position between the maximum wide-angle position and G icon, the camera
can focus on subjects as close as 1 cm (0.4 in.) from the lens.
B Note on Using the Flash
The flash may be unable to light the entire subject at distances of less than 50 cm (1 ft 8 in.).
C Autofocus
In the A (auto) mode, you can focus without pressing the shutter-release button halfway by setting
Autofocus mode in the shooting menu (A51) to Full-time AF.
When using other shooting modes, Full-time AF is turned on automatically when macro mode is
turned on.
You may hear the sound of the camera focusing.
C The Macro Mode Setting
• Macro mode cannot be used when using certain shooting modes. See “Available Functions”
(A53) and “Default Settings” (A59) for more information.
• The changed macro mode setting applied in A (auto) mode is saved in the camera’s memory
even after the camera is turned off.
Macro mode