Filter
Top Products
F8
Technical Notes and Index
Camera turns off without
warning.
• Battery is exhausted.
• The camera automatically turns off to save power if
no operations are performed for an extended
period of time.
• The camera or battery have become too cold and
cannot operate properly.
• The camera turns off if the Charging AC Adapter is
connected while the camera is on.
• The camera turns off if the USB cable connecting it
to a computer or printer is disconnected.
Reconnect the USB cable.
• Inside of the camera has become hot. Leave the
camera off until the inside of the camera has
cooled, and then try turning it on again.
24
104
F3
16
86, 91,
E30
–
Monitor is blank.
• Camera is off.
• Standby mode for saving power: press the power
switch, the shutter-release button, A button, c
button, or b (e movie-record) button.
• When flash lamp flashes, wait until flash has
charged.
• Camera and computer are connected via USB
cable.
• Camera and TV are connected via audio/video
cable or HDMI cable.
25
2, 25
57
86, 91
86, E26
Monitor is hard to read.
• Adjust monitor brightness.
• Monitor is dirty. Clean monitor.
104, E86
F6
Problem Cause/Solution A