Filter
Top Products
88
Camera Settings that Cannot Be Applied Simultaneously
More on Shooting
AF area mode
Smile timer (A 37)
Face detection is used regardless of the AF
area mode setting.
Continuous (A 80)
When shooting with Pre-shooting cache,
Continuous H: 120 fps, or Continuous H:
60 fps, AF area mode is fixed at Center.
Autofocus mode Continuous (A 80)
When shooting with Pre-shooting cache,
Continuous H: 120 fps, or Continuous H:
60 fps, Autofocus mode is fixed at Single
AF.
Print date Continuous (A 80)
When using any setting other than Multi-
shot 16, the date is not imprinted.
Motion detection
ISO sensitivity (A 52)
Motion detection is disabled when the
ISO sensitivity is set to any setting other
than Auto.
AF area mode (A 53)
When AF area mode is set to Subject
tracking, Motion detection is not
available.
AF assist Continuous (A 80)
When shooting with Pre-shooting cache,
Continuous H: 120 fps, or Continuous H:
60 fps, the AF-assist illuminator does not
light.
Digital zoom
AF area mode (A 53)
When AF area mode is set to Subject
tracking, digital zoom is not available.
Continuous (A 80)
When using Multi-shot 16, digital zoom is
disabled.
Blink warning Smile timer (A 37) Blink warning does not function.
Restricted
function
Setting Descriptions
B Features Not Available in Continuous Shooting Mode
When using continuous shooting mode, the following features cannot be used.
• Flash mode (A32)
• Self-timer (A35)/Smile timer (A37)
• Motion detection (A 180)
• Blink warning (A188)
D More Information
See “Notes on Digital Zoom” (A 182) for more information.