Filter
Top Products
184
Setup Menu
Basic Camera Setup
Auto Off
If no operations are performed for a specified amount of time, the monitor turns
off and the camera enters standby mode (A 19).
Choose the time allowed to elapse before the camera enters standby mode from
30 s, 1 min (default setting), 5 min, and 30 min.
d button M z (Setup menu) (A170) M Auto off
C When the Monitor Has Turned Off to Save Power
• When the camera is in standby mode, the power-on lamp blinks.
• If no operations are performed for another three minutes, the camera will turn off automatically.
• When the power-on lamp is blinking, the following operations will turn the monitor back on.
- Pressing the power switch, shutter-release button, c button, or b(e movie-record) button.
- Rotating the mode dial.
C Auto Off
T
he time allowed to elapse before the camera enters standby mode is fixed in the following
situations:
• While menus are displayed: 3 minutes
• During slide show playback: up to 30 minutes
• When the AC Adapter EH-62F is connected: 30 minutes