Filter
Top Products
136
Basic Camera Setup: The Setup Menu
Shooting, Playback and Setup Menus
Sound Settings
Adjust the following sound settings.
Auto Off
When the camera is on and a period of time passes without any operations having
been performed, the camera will enter standby mode (A 19) to save power.
Once the camera has entered standby mode, the power-on lamp will blink, and if
no operations are performed for another three minutes, the camera will turn off.
Choose the time allowed to elapse before the camera enters standby mode if no
operations are performed from 30 s, 1 min (default setting), 5 min, and 30 min.
C Canceling Standby Mode
Cancel standby mode and reactivate the monitor by pressing any of the following buttons.
C Note on Auto Off
Regardless of the option selected, the monitor will remain on for three minutes when menus are
displayed, a maximum of 30 minutes during slide show playback, and 30 minutes when the AC
adapter is connected.
Tap F M z (Setup menu) (A128) M Sound settings
Button sound
Turn button sound On or Off.
When On (default setting) is selected, a beep will sound once when operations are
completed successfully, twice when focus has been locked, and three times when
an error is detected. Start-up sound will also play when the camera is turned on.
Shutter sound
Choose shutter sound from On (default setting) or Off.
Tap F M z (Setup menu) (A128) M Auto off
• the power switch • the shutter-release button • the A button • the c button