Nikon S4100 Camcorder User Manual


 
74
More on Shooting
Shooting Smiling Faces (Smart Portrait Mode)
At the default settings, the camera uses the face detection function to detect
human faces, and then automatically releases the shutter when a smile is detected
(smile timer). The skin softening option can be used to smooth skin tones of
human faces.
1 Press the A button in shooting
mode and tap F.
The camera enters smart portrait mode.
2 Frame a picture.
Point the camera at the subject.
When the camera detects a human face, a yellow double
border (focus area) is displayed around that face. When
focus is acquired on that face, the double border will turn
green for a moment and focus is locked.
Up to three faces can be detected. When the camera
detects more than one face, the double border is displayed around the face closest to
the center of the frame, and single borders around the others.
Tap the face framed by a single border to change the focus area to that face.
3 The shutter is automatically released.
If the camera detects that the face framed by the double border is smiling, Smile timer
(A 77) is activated and the shutter is automatically released.
Each time the shutter is released, the camera again initiates face detection and smile
detection operations for continuous automatic shooting.
4 Shooting ends.
To stop automatic shooting of smiling faces, either turn the camera off, set Smile timer
to Off, or press the A button and select another shooting mode.
Shooting mode
Smart portrait
250
250
2501/
1/
1/ F3.2
F3.2
F3.2