Filter
Top Products
105
Basic Camera Setup: The Setup Menu
Shooting, Playback and Setup Menus
i Sound Settings
Adjust the following sound settings.
k Auto Off
When the camera is on and a period of time passes without any operations been
done, the camera will enter standby mode (A 15) to save power. Once in standby
mode, the power lamp will blink, and if no operations are performed for another
three minutes the camera turns off. To exit standby mode press either the power
switch or the shutter button. The time taken to enter standby mode can be set to
30 s, 1 m (default setting), 5 m, or 30 m.
C Notes on Auto Off
Regardless of the option selected, the monitor will remain on for three minutes when menus are
displayed, or for 30 minutes during slide show playback or when the AC adapter is connected.
Button sound
Turn button sound On or Off.
When On (default setting) is selected, a beep will sound once when operations are
completed successfully, two times when focus has been locked, and three times
when an error is detected , and welcome sound.
Shutter sound
Choose shutter sound from On (default setting) or Off.