Filter
Top Products
20
Basic Photography and Playback: Auto Mode
Basic Photography and Playback: Auto Mode
Step 1 Turn the Camera On and Select
A
(Auto) Mode
This section describes how to take pictures in A (auto) mode, an automatic,
“point-and-shoot” mode recommended for first-time users of digital cameras.
1 Press the power switch to turn on the camera.
The power-on lamp will light up, the lens will open and
the monitor will turn on.
Proceed to step 4 when A is displayed.
2 Press e.
3 Use the rotary multi selector to choose A and
press k.
The camera enters A (auto) mode.
4 Check the battery level and number of
exposures remaining.
Battery Level
Number of Exposures Remaining
The number of pictures that can be stored depends on the capacity of the memory or
memory card and image mode setting (A76
).
Monitor Description
NO INDICATOR Battery fully charged.
B
Battery low; prepare to charge or
replace the battery.
N
Battery
exhausted.
Cannot take pictures. Recharge or
replace with a fully charged
battery.
Shooting
16
16
16
Battery level indicator
Number of exposures
remaining