Filter
Top Products
H–1
Tips on Speedlight Care and Reference Information
H
H
Tips on Speedlight Care and Reference Information
This section explains troubleshooting, Speedlight care, specifi cations
and optional accessories.
Troubleshooting
If a warning indicator appears, use the following chart to determine
the cause of the problem before taking the Speedlight to a retailer or
Nikon representative for repair.
Problems with the SB-700
Problem Cause Solution
0
The power cannot
be turned on.
The batteries are not
correctly installed.
Insert the batteries
correctly.
B-8
Battery power is weak. Replace the batteries. B-10
The fl ash-ready
indicator does not
light up.
The standby function is
activated.
Press the camera •
shutter-release button
halfway.
Turn the SB-700 on.•
E-30
Battery power is weak. Replace the batteries. B-10
The effective fl ash
output distance
range does not
appear.
The fl ash head is not set
to the front position.
Set the fl ash head to
the front position.
B-13
Aperture information has
not been received from
the camera.
Check camera settings.
•
Detach and attach the
•
SB-700 on a camera.
—
The SB-700 cannot
receive focal length
information from the
camera.
Turn the SB-700 and
camera off, and then
turn them on again.
—