Filter
Top Products
D–9
Wireless Multiple Flash-unit Photography
D
Advanced Wireless Lighting Operation
Taking a picture with Advanced Wireless
Lighting
1. Master flash unit setting (flash mode, flash
compensation value and channel)
[Setting i-TTL mode and channel 1 (example)]
Set the mode selector to
[TTL].
In order to set the manual flash •
mode, set the mode selector to [M].
Press the [SEL] button
to select the master
fl ash unit, choose a fl ash
compensation value with
the selector dial, and then
press the [OK] button.
Set the flash output level if the •
flash mode is set to manual flash.
Repeat procedure
above to set the fl ash
compensation values of
the remote fl ash unit
groups (A and B).
Set the flash output level if the •
flash mode is set to manual flash.