Nikon SB-700 Camera Flash User Manual


 
D27
Wireless Multiple Flash-unit Photography
D
Checking Status in Wireless Multiple Flash-unit Photography
The ash-ready indicator on the SB-700 and the sound monitor can
be used to check that wireless multiple ash-unit photography is
operating during and after taking a picture.
When the SB-700 is used as a wireless remote flash unit, the sound
monitor can be used to check operational status. This function can
be activated or canceled using custom setting (0B-20). It is set to
activate as the default.
Checking flash operation using the flash-ready indicator
or sound monitor
Master
ash unit
Remote ash unit
Speedlight status
Flash-ready
indicator
Flash-ready
indicator
Sound
monitor
Lights up
The back
indicator
lights
up and
the front
indicator
blinks.
One beep Ready to re
Goes out
and lights
up when
ready to re
The back
indicator
lights
up and
the front
indicator
blinks or
goes out.
Two short
beeps
Fired properly