Filter
Top Products
C–10
Flash Modes
C
When the selector dial is rotated counterclockwise, the indicated •
denominator increases (flash output level decreases). When the
selector dial is rotated clockwise, the indicated denominator
decreases (flash output level increases).
The flash output level changes in ±1/3 EV steps except between 1/1 •
and 1/2. 1/32 -0.3 and 1/64 +0.7 represent the same flash output
level.
In default setting, the flash compensation step between 1/1 and 1/2 •
is ±1 EV step. This step can be changed to ±1/3 EV steps using a
custom setting (0B-21). With some cameras, and when using faster
shutter speeds with a flash output level higher than M1/2, actual
flash output may decrease to M1/2 level.