Olympus 1050SW Digital Camera User Manual


 
44
EN
Resetting the le name numbers of
pictures [FILE NAME]
x SETUP X FILE NAME
Month: 1 to C
(A=October,
B=November,
C=December)
Day: 01 to 31
Pmdd
Folder name Folder name File name
DCIM
100OLYMP
999OLYMP
Pmdd0001.jpg
Pmdd9999.jpg
Automatic
numbering
Automatic
numbering
Submenu 2 Application
RESET
This resets the sequential number
for the folder name and le name
whenever a new card is inserted.
*1
This is useful when grouping
images on separate cards.
AUTO
Even when a new card is inserted,
this continues the numbering for
the folder name and le name from
the previous card. This is useful for
managing all image folder names
and les names with sequential
numbers.
*1
The number for the folder name is reset to 100, and
the one for the le name is reset to 0001.
Adjusting the CCD and adjusting the
image processing function
[PIXEL MAPPING]
x SETUP X PIXEL MAPPING
This function has already been adjusted
at factory shipping, and no adjustment is
needed right after purchase. Approximately
once a year is recommended.
For best results, wait at least one minute
after taking or viewing pictures before
performing pixel mapping. If the camera is
turned off during pixel mapping, be sure to
perform it again.
To adjust the CCD and to adjust the
image processing function
Press the o button when [START]
(submenu 2) is displayed.
The camera checks and adjusts the CCD and the
image processing function at the same time.
book_oima_myu1050SW_en.indb 44book_oima_myu1050SW_en.indb 44 2008/07/10 11:49:412008/07/10 11:49:41