Filter
Top Products
46
EN
Using the alarm [ALARM CLOCK]
x SETUP X ALARM CLOCK
When [X] has not been set, [ALARM CLOCK] is not available.
When [jSILENT MODE] (p. 49) is set to [ON], the alarm will not sound.
When [DUALTIME] (p. 45) is set to [ON], the alarm is activated at the date and time set in
[DUALTIME].
Submenu 2 Submenu 3 Submenu 4 Application
OFF — —
The alarm is canceled.
ONE TIME
TIME
(Proceeds to
the time setting
screen
*1
.)
The alarm is activated once according to the
selected time, sound and volume settings.
SNOOZE
*2
OFF/ON
SOUND TYPE
1/2/3
VOLUME
LOW/HIGH
DAILY
(Submenus 3 and 4 can be set in the
same way as [ONE TIME].)
The alarm is activated daily at the same settings.
*1
The setting procedure is identical to that in “Setting the date and time” (p. 13).
*2
In this setting, even if the alarm is stopped once, it will be activated every 5 minutes, up to 7 times.
To check the alarm time, press the g button while the camera is turned off. The current and
alarm set times are displayed for approx. 3 seconds.
To activate the alarm To stop the alarm
After making the detailed settings of [ONE
TIME] or [DAILY], press the o button to
turn off the camera.
When the alarm is activated, press any button
to stop the alarm and turn off the camera.
When [SNOOZE] is set to [OFF], the alarm
stops automatically and the camera turns off
after 1 minute of no operation.
Selecting the video signal system to match your TV [VIDEO OUT]
x SETUP X VIDEO OUT
The TV video signal system varies depending on the countries and regions. Before viewing camera
images on your TV, select the video output according to your TV’s video signal type.
Submenu 2 Application
NTSC Connecting the camera to a TV in North America, Taiwan, Korea, Japan, and so on
PAL Connecting the camera to a TV in European countries, China, and so on
The factory default settings differ according to the region where the camera is sold.
book_oima_myu1050SW_en.indb 46book_oima_myu1050SW_en.indb 46 2008/07/10 11:49:452008/07/10 11:49:45