Filter
Top Products
RE-MOUNTING THE C AP WHEN IT COMES OFF
To prevent the hinge joint from breaking, the cap will come off if
too much force is used when opening it.
(Do not attempt to remove the cap deliberately as repeated disconnection of the cap will
loosen the hinge joint, increasing the likelihood that the cap will come off.)
If the cap comes off, re-mount it as instructed below.
1.
Turn the camera, so that the
bottom is facing up.
2.
Align the arrow-pointed recesses on
the cap's hinge joint with the
protrusions (silver parts) on the bottom
tip of the lens barrel. While aligning
them on both the left and right, press
the cap firmly against the lens.
Open and close the cap to make sure the
hinge joint has been engaged securely.
18