Red-Eye Reducing Flash
AUTO-S
Approximately 20 pre-flashes are emitted before the main flash
fires, significantly reducing the phenomenon of "red-eye" (when a
subject's eyes appear red). This mode is the same as Auto Flash
except for the pre-flashes.
1.
Flip up the flash, and select the Auto-S mode. Press the shutter release
button.
Red-eye reduction may not be effective
when the subject:
1. Wasn't looking at the flash from right
front.
2. Wasn't watching the pre-flashes.
3. Was too far from the camera.
Did not respond to the pre-flashes
due to particular characteristics of
the individual.
Notes:
•After pressing the shutter release button, hold the camera securely until the shutter has been
released.
•To cancel the Auto-S mode, select another mode following the procedure on page 29.
33