Filter
Top Products
16
ENGLISHPreparationPrinting Introduction
For Your
Reference
Loading the ink ribbon cartridge
About the print pack
You need the supplied starter kit or an optional print pack for printing.
Always use the ink ribbon cartridge together with the paper supplied
in the same pack.
Do not reuse paper that has been printed on or fed through the
printer.
1 Remove the left side cover.
See page 14. “Connecting the power supply and turning on/off the
printer”
2 Release the ink ribbon cartridge stop and wind the ink ribbon to
remove any slack.
To continue using a partially used ink ribbon cartridge, reinsert it
after removing any slack as shown in the picture.
While pressing the center of the reel,
wind the ink ribbon in the direction of
the arrow.
p11_e_000_bookfile.book Page 16 Monday, July 25, 2005 10:47 AM