Filter
Top Products
EN 21
Menu operations
• Some menu items are not available depending on the position of the mode dial.
g “Functions available in shooting modes and scene modes” (P.72)
g “SETUP menus” (P.39)
• The factory default settings are displayed in gray ( ).
Still picture image quality and their applications
*1 Not displayed when set to h or s.
*2 If you select [SQ1] or [SQ2], select [HIGH] or [NORMAL] after selecting the image size.
JPEG copy
Pictures taken in the [RAW] data format can be stored in JPEG format at the same time as they are
recorded in raw data. To record pictures in JPEG format you can select [SHQ], [HQ], [SQ1] or [SQ2]
for the record mode, but you cannot select the image size. Pictures are recorded in the size
currently set for each record mode.
1 IMAGE QUALITY
Changing the image quality
Image quality/ Image size Compression Application
RAW
*1
3072x2304 —
• Raw uncompressed data.
• Data is in ORF format.
SHQ 3072x2304 Low
compression
• This is useful for printing large images on
full-size paper. (For [3072x2304].)
• This is useful for ordering prints from a
photo store. (For [3 : 2 3072x2048].)
• This is useful for performing computer
image processing, such as contrast
adjustment and red-eye correction.
3 : 2
3072x2048
HQ 3072x2304 Standard
compression
3 : 2
3072x2048
SQ1
*2
2560x1920 Low
compression
(High quality) /
Standard
(Standard
compression)
• This is useful for printing on full-size
paper.
• This is useful for computer editing such
as rotating or adding text to a picture.
2304x1728
2048x1536
SQ2
*2
1600x1200 Low
compression
(High quality) /
Standard
(Standard
compression)
• This is useful for printing on A5 paper and
below.
• This is useful for viewing pictures on a
computer.
1280x960
1024x768
• This is useful for sending as e-mail
attachments.
640x480
16 : 9 1920x1080 Standard
compression
• This is useful for expressing the
broadness of a subject such as
landscapes and for viewing pictures on a
wide-screen television.
• In the [IMAGE QUALITY] screen, select [RAW], and press 3.
• Select a JPEG duplicate setting from [OFF], [SHQ], [HQ], [SQ1]
and [SQ2] and press o. (Select [OFF] to save raw data only.)
n
ging the image quality
OK
MENU
SET
BACK
JPEG DUPLICATE SETTING
SHQ
OFF
HQ
SQ1
[IN]
d4321_e_unifild_Print_00_bookfile.book Page 21 Tuesday, December 19, 2006 11:20 AM