Filter
Top Products
EN 79
Appendix
Removing the card
3 Push the card all the way in and release slowly.
4 Close the card cover.
Note
• Do not open the battery compartment cover and card cover while the card access lamp is
blinking as data reading and writing is in progress. Doing so may damage the data in the
internal memory or the card and render the internal memory or card unusable.
An AC adapter is useful for time-consuming tasks such as image downloads to a computer or when
running a slideshow for a long period of time.
Do not use any other AC adapter with this camera.
Note
• Do not remove or load the battery or connect or disconnect the AC adapter or the multi-
adapter while the camera is turned on. Doing so could affect the camera’s internal settings
or functions.
• The AC adapter can be used within the range of AC 100 V to AC 240 V (50/60 Hz).
• When using abroad, you may need a plug adapter to convert the plug to match the AC wall
outlet. For details, ask at your local electrical shop or travel agent.
• Do not use travel voltage converters as they could damage your AC adapter.
• Be sure to read the instruction manual for the AC adapter.
AC adapter
• The card protrudes slightly and stops. • Grasp the card and remove.
d4321_e_unifild_Print_00_bookfile.book Page 79 Tuesday, December 19, 2006 11:20 AM