Olympus SP-550UZ Digital Camera User Manual


 
24 EN
Menu operations
When [PRESET] is selected
When [V] is selected
With the [ONE TOUCH WB] screen displayed, point the camera at a sheet of white paper.
Position the paper so that it fills the screen, making sure there are no shadows.
Press o. The new white balance is set.
If set to over [3200], [IMAGE QUALITY] is limited to below [2048x1536].
If [FINE ZOOM] or [DIGITAL ZOOM] is set to [ON], [3200] and [5000] cannot be set.
If [DRIVE] is set to [c] or [d(15fps)], [HIGH ISO AUTO], [50], [100] and [200] cannot be set.
Press 12 to select a white balance setting, then press o.
ISO .......................................................................................
Changing the ISO sensitivity
AUTO Sensitivity is automatically adjusted according to the conditions of the
subject.
HIGH ISO AUTO This function has a higher sensitivity compared to [AUTO] and
stabilizes the blur caused by a moving subject or camera movement
when taking pictures.
50/100/200/400/
800/1600/3200/
5000
A low value lowers the sensitivity for daylight shooting of clear, sharp
pictures. The higher the value, the better the camera’s light sensitivity
and ability to shoot with a fast shutter speed and in low light conditions.
However, high sensitivity introduces noise into the resulting picture,
which may give it a grainy appearance.
OK
MENU
SET
BACK
5
3
1
w
PRESET WB
o
n
ging the ISO sensitivity
d4321_e_unifild_Print_00_bookfile.book Page 24 Tuesday, December 19, 2006 11:20 AM