Filter
Top Products
Guide
Move the camera slowly while keeping it straight, and
stop the camera where the pointer and target mark
overlap.
• The camera releases the shutter automatically.
r3_ When shooting reaches the end of the guide on the
monitor, it finishes automatically.
• The camera automatically processes the images
and the combined panorama image is displayed.
• To stop shooting in the middle, press the shutter
button or (_) button. Ifthe camera pauses for a
while, shooting automatically finishes.
_'} Ifthe message "Image was not created." is displayed,
shoot again.
4 When shooting with [Auto] (SZ-IO)
q_ Press the shutter button to take the first frame.
_2' Move the camera slightly in the direction of the second
frame.
Pointer
Screen when combining images
from left to right
_P_"To combine only two pictures, press the _) button
before taking a third frame.
4" Repeat Step _3 to take a third frame.
• After the third frame is taken, the camera
automatically processes the frames end the
combined panorama image is displayed.
_7_}Toexit the panorama function without saving an
image, press the MENU button.
_[} If the shutter does not automatically release, try
[Manual] or [PC].
Taking pictures with [Manual]
i" Use _.v<_D to specify at which edge the next
picture is to be connected.
Direction for
combining the next
frame
'2_ Press the shutter button to take the first frame. The
white-boxed part of the first frame is displayed on joint
area 1.
EN