Filter
Top Products
Typ.C I/
Type D(CB-HD1) , '_ t ,
_ For details on changing the input source of the TV, refer to the TV's instruction manual.
_1 When the camera and TV are connected by both an AV cable and an HDMI cable, the HDMI cable will take priority.
_ Depending on the TV's settings, the displayed images and information may become cropped.
To operate images with the TV remote control
'i' Set [HDMI Control[ to [On], and turn off the camera.
_.&'Connect the camera and TV with an HDMI cable. "Connection via HDMI cable" (p. 52)
r3_ First turn on the TV,end then turn on the camera.
• Operate by following the operation guide that is displayed on the TV.
With some TVs, operations cannot be performed with the TV remote control even though the operation guide is
displayed on the screen.
_ If operations cannot be performed with the TV remote contro£ set [HDMI Control] to [Off] and operate using the
camera.
Saving battery power between shots Changing the display language [f_]
[Power Save] ......... ...............................
........ 8aYe ................
...................................................... 'sob_ . ; ,.i.€_ ;
Thelanguageforth........ d
_........ Cancels [Power Save]. Languages errOrmonitormeSsageSisselected.displayedon the
When the camera is not being used
for approx. 10 seconds, the monitor
On automatically turns off to save
battery power.
To resume standby mode
Pressanybutton.
ENiiiiiiiii53iiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiii