Filter
Top Products
120
Connecting to a Printer
Connecting to Televisions, Computers and Printers
Connecting the Camera to a Printer
1 Turn off the camera.
2 Turn on the printer.
Check printer settings.
3 Connect the camera to the printer using the supplied USB cable.
4 The camera is automatically turned on.
When properly connected, the PictBridge startup screen
(
1
) will be displayed in the camera monitor, followed by
the Print selection screen (
2
).
B Connecting the USB Cable
When connecting the USB cable, be sure that the connectors are properly oriented. Do not use force
when connecting the USB cable. When disconnecting the USB cable, do not pull the connector at an
angle.
B If the PictBridge Screen is not Displayed
Turn off the camera and disconnect the USB cable. Set Charge by computer (A140) in the
camera’s setup menu to Off, then connect the camera again.
Prin t selection
4
NO. 4
2010
15/05
12