Filter
Top Products
27
VQT3Q78
Preparation
Setup
6
Setting date and time
When the unit is turned on for the first time, a message asking you to set the date and time
will appear.
Select [YES] and perform steps 2 to 3 below to set the date and time.
¬ Change the mode to or .
1 Select the menu.
2 Select the date and time to be
set using the cursor button
right or left, then adjust the
desired value using the cursor
button up or down.
A Displaying the World time setting
(l 40):
[HOME]/ [DESTINATION]
≥ The year can be set between 2000 and
2039.
≥ The 12-hour system is used to display the
time.
3 Select [ENTER] and press the
button in the center.
≥ The clock function starts at [00] seconds.
≥ A message prompting for World time
setting may be displayed. Perform the
World time setting. (l 40)
≥ Select [EXIT], then press the button in the
center or press the MENU button to
complete the setting.
≥ The date and time function is driven by a
built-in lithium battery.
≥ If the time display becomes [- -], the built-
in lithium battery needs to be charged. To
recharge the built-in lithium battery,
connect the AC adaptor or attach the
battery to this unit. Leave the unit as it is
for approx. 24 hours and the battery will
maintain the date and time for approx.
6 months. (The battery is still being
recharged even if the unit is off.)
: [SETUP] # [CLOCK SET]
MENU
AG-AC7P-VQT3Q78_mst.book 27 ページ ２０１１年５月１８日 水曜日 午後１時４０分