Filter
Top Products
96
VQT3Q78
“ERROR OCCURRED.
PLEASE TURN UNIT
OFF, THEN TURN ON
AGAIN.” is displayed.
≥ The unit has automatically detected an error. Restart
the unit by turning off and on.
≥ The unit will be turned off in about 1 minute if the unit
is not turned off and on.
≥ Repair is needed if it is repeatedly displayed even if
it is restarted. Detach the power connected, and
consult the dealer who you purchased this unit from.
Do not attempt to repair the unit by yourself.
VIERA Link does not
work.
[Setting on this unit]
≥ Connect with a HDMI cable (optional). (l 82)
≥ Press the MENU button, then select [SETUP] #
[VIERA Link] # [ON] using the cursor button. (l 82)
≥ Turn the unit off and then back on again.
[Setting on other devices]
≥ If the TV input does not switch automatically, switch
the input using the TV remote control.
≥ Check the VIERA Link setting on the connected
device.
≥ Please refer to the operating instructions of the
connected device.
When connected by
the USB cable, this
unit is not detected by
the PC.
≥ After re-inserting the SD card into the unit, reconnect
the supplied USB cable.
≥ Select another USB terminal on the PC.
≥ Check the operating environment. (l 86)
≥ Connect the supplied USB cable again after
restarting the PC and turning on this unit again.
Problem Check points
AG-AC7P-VQT3Q78_mst.book 96 ページ ２０１１年５月１８日 水曜日 午後１時４０分