Filter
Top Products
42
VQT3Q78
The unit is put into recording pause approx. 1 second when the unit is turned on with the
mode set to or .
≥ Depending on the recording conditions, start time may be longer than 1 second.
≥ In the quick power on mode, the zoom magnification becomes 1k.
The recording lamp lights up during recording. When this is set to [OFF], it does not light
during recording.
Touch screen operation, start and stop of recording and unit on/off can be confirmed with this
sound.
(Volume low)/ (Volume high)
2 Beeps for 4 times
When an error occurs. Check the sentence displayed on the screen. (l 92)
It adjusts brightness and color density on the LCD monitor.
≥ These settings will not affect the images actually recorded.
1 Select [LCD SET] using the cursor button and press the button in the center.
2 Select the desired setting item and press the button in the center.
[BRIGHTNESS]:
Brightness of the LCD monitor
[COLOR]:
Color level of the LCD monitor
3 Adjust settings using the cursor button
right or left.
4 Select [ENTER] and press the button in the
center.
≥ Select [EXIT] and press the button in the center or press the MENU button to exit the menu
screen.
It adjusts the brightness of the viewfinder.
≥ These settings will not affect the images actually recorded.
1 Select [EVF SET] using the cursor button and press the button in the center.
2 Adjust settings using the cursor button right or left.
≥ Adjust while checking the picture in the viewfinder.
3 Select [ENTER] and press the button in the center.
≥ Select [EXIT] and press the button in the center or press the MENU button to complete the
setting.
[QUICK POWER ON]
[OFF]/[ON]
[REC LAMP]
[OFF]/[ON]
[ALERT SOUND]
[OFF]/ /
[LCD SET]
[EVF SET]
AG-AC7P-VQT3Q78_mst.book 42 ページ ２０１１年５月１８日 水曜日 午後１時４０分