Filter
Top Products
– 110 –
Setting Menu Screens
FUNCTION 4/5 Screen
This page performs the adjustment function 4 settings.
Item
FRONT POWER
FRONT MIC
REAR MIC CH1
REAR MIC CH2
LINE CH1/CH2
REAR AUDIO
MIC LOWCUT
CH1
MIC LOWCUT
CH2
EMPHASIS
LIMITER
TEST TONE
Variable
range
ON
OFF
p40/
p50/
p60 dB
p40/
p50/
p60 dB
p40/
p50/
p60 dB
o4/0/
p6 dB
STEREO
MONO
ON
OFF
ON
OFF
ON
OFF
ON
OFF
NORMAL
ALL
VF
display
ENG
ENG
ENG
ENG
ENG
ENG
ENG
ENG
ENG
ENG
ENG
Remarks
ON: The phantom power is supplied
to the front microphone.
OFF: The phantom power is not
supplied to the front microphone.
Camera microphone input level
selection
Rear jack AUDIO CH1 input
microphone level selection
Rear jack AUDIO CH2 input
microphone level selection
Rear jack AUDIO CH1/CH2 input line
input level selection
Audio CH1/CH2 rear jack input
selection
STEREO: Selects stereo input (CH1
input is recorded in CH1 and CH2
input is recorded in CH2.)
MONO: Selects monaural input (The
signals of CH1 and CH2 are mixed
and recorded in CH1 and CH2
respectively.)
CH1 INPUT high-pass filter ON/OFF
switching
CH2 INPUT high-pass filter ON/OFF
switching
Emphasis ON/OFF switching during
recording. The EE output signals are
also linked with the setting of this
switch.
Audio limiter ON/OFF switching
ON: The limiter functions.
OFF: The limiter does not function.
NORMAL: The TEST TONE signal is
output when the CAM/BAR switch is
set to BAR and the AUDIO IN switch
CH1 is set to FRONT.
ALL: The TEST TONE signal is
output when the CAM/BAR switch is
set to BAR.
-
FUNCT I
O
N4/
5
-
FR
O
NT
M
IC :
-
40dB
REAR
M
IC CH1 :
-
60dB
REAR
M
IC CH2 :
-
60dB
LINE C
H
1/CH2 :+4dB
REAR AUD I
O
:
S
TERE
O
TEST T
O
NE :
NO
R
M
AL
M
IC L
O
W
CUT CH1 :
O
N
M
IC L
O
W
CUT CH2 :
O
N
E
M
PHAS I S :
O
FF
O
FFL
M
ITERI:
O
¢
FR
O
NT P ER
W
:
ON
The underlined setting in the Variable range column indicates the preset mode.
Menu screen display methods
USER menu: Setting the MENU switch to SET displays the USER menu.
ENG menu: Holding down the SHIFT/ITEM and UP buttons simultaneously and setting the MENU switch to SET displays
the ENG menu.
|Notes{
ÁThe frequency response for MIC LOWCUT ON are 200 Hz to 10 kHz.
ÁLIMITER initiates the limiter operation at a level equivalent to 3 dB below the peak
(o18 dB).
ÁAUDIO SELECT initiates the limiter operation at the MAN setting and the AGC op-
eration at the AUTO setting.