Filter
Top Products
– 120 –
Setting Menu Screens
VF OPERATION Screen
This page performs the viewfinder display settings.
Item
VF OUT
VF DTL
ZEBRA1
DETECT
ZEBRA2
DETECT
ZEBRA2
Variable
range
Remarks
VF
display
Y
NAM
R
G
B
0
.
.
.
2
.
.
.
4
50
.
.
.
70
.
.
.
110
50
.
.
.
85
.
.
.
110
ON
OFF
SPOT
VF OUT selection
NAM (N Additive Mix): Signals with the
highest level among R, G and B are
output.
VF DTL selection
The detail of the VF signals is further
boosted. At the “0” setting, the detail is
the same as the main line.
ZEBRA1 DETECT level (IRE value)
setting
ZEBRA2 DETECT level (IRE value)
setting
ZEBRA2 ON/OFF switching and SPOT
selection
FWhen ZEBRA2 is set to SPOT, set
Fthe ZEBRA2 DETECT value higher
Fthan the ZEBRA1 DETECT value. If
Fthe ZEBRA2 DETECT value is less
Fthan the ZEBRA1 DETECT value, the
FZEBRA pattern will not be displayed.
ENG
ENG
ENG
ENG
ENG
-
VF
O
PERAT I
O
N
-
¢
VF
O
UT : Y
VF DTL : 2
ZEBRA1 DETECT :
0
ZEBRA2 DETECT : 0
7
0
85
ZEBRA2 :
SPO
T
The underlined setting in the Variable range column indicates the preset mode.
Menu screen display methods
USER menu: Setting the MENU switch to SET displays the USER menu.
ENG menu: Holding down the SHIFT/ITEM and UP buttons simultaneously and setting the MENU switch to SET displays
the ENG menu.
Item
F2.8 ADJ
F16 ADJ
Variable
range
Remarks
VF
display
——
——
Voltage is output only when selected
by the cursor (arrow).
Voltage is output only when selected
by the cursor (arrow).
ENG
ENG
|Note{
When using a lens which allows the lens iris open or close end to be adjusted, set
either “F2.8 ADJ” or “F16 ADJ” to ON and repeatedly adjust the lens iris until it is
“F2.8” or “F16”, respectively. (This adjustment need not be performed if the lens
does not have this adjustment function.)
LENS ADJ Screen
This page performs the lens adjustments. The ON/OFF status for each item is indicated by displaying an asterix (E) or period
(
.
) in front of the item on the screen.
-
LENS ADJ
-
¢
.
F2
.
8ADJ
.
F16 ADJ
E:ON
.
: OFF