Filter
Top Products
–93–
Successive Shooting in Other Cases
If successive shooting is to be performed after the tape has been run, the cassette has been
ejected, or when using a tape which has only been recorded part-way, follow the procedures
outlined below.
1 Press the PLAY button while watching the viewfinder screen and play back the tape.
2 At the place where continuity between frames is to be provided, press the PLAY (or STOP)
button again to stop the tape.
3 Press the RET button on the lens. Preparations for frame-to-frame continuity are made
about two seconds later.
4 Press the VTR START button of the unit or the VTR button of the lens to start recording.
1,2
4
3