– 133 –
Specifications
General
Operating temperature: 32uF to 104uF
Storage temperature: p4uF to 140uF
Operating humidity: Less than 85% (relative humidity)
Continuous operating time: Approx. 80 min. (using 1 Anton Bauer Trimpac 14 battery)
Weight: Approx. 14.52 lbs (6.6 kg) (incld. main unit, viewfinder, lens,
battery pack, tape and microphone)
Dimensions: 4
13
/16Ω (W)q8
1
/16Ω (exclud. handle) (H)q12
3
/8Ω (D)
122.5q204q313 mm
Camera Section
Pick-up devices: 2/3-inch on-chip M-FIT type of CCD
System: RGB 3-CCD system
Picture elements: 520,000 pixel
Spectral system: F1.4 prism system
Built-in filters: 1; 3200K
2; 5600Ko1/4 ND
3; 5600K
4; 5600Ko1/16 ND
Quantization: 10-bit A/D (R, G and B channels), 36 MHz
Digital signal processing: 16-bit long operation, 36 MHz
Horizontal drive frequency: 18.0 MHz
Programmable gains: 3 positions can be set from among p3, 0, 3, 6, 9, 12, 15, 18,
21, 24 and 30 dB.
Super gain: 30 dB
Shutter speeds: 1/100, 1/120, 1/250, 1/500 and 1/1000 sec.
Synchro scan mode; 1/63.2–1/201.9 sec.
Lens mount: 2/3Ω Bayonet type
Sensitivity: F8 (2000 lux, 89.9% reflection)
Minimum subject brightness: 2 lux (F1.4, o30 dB)
Image S/N ratio: 60 dB (typ.)
Horizontal resolution: 700 lines (center, typ.)
Vertical resolution: 450 lines
Sampling frequency: 36 MHz
Registration: Below 0.05% (entire range) (excld. lens)
Viewfinder
CRT: 1.5Ω monochrome
Horizontal resolution: 600 lines (center, typ.)
Controls/switches: Controls; BRIGHT, CONTRAST, PEAKING
Switches; TALLY, ZEBRA
Power supply voltage: DC 12 V
Power consumption: 29 W