Panasonic AJ-PD900W Digital Camera User Manual


 
–24–
Power Supply
Using the Panasonic AU-BP402 Battery Pack
1 Detach the battery mounts.
2 Connect the unit’s connectors with the connectors of the AU-M402H battery case.
3 Mount the AU-M402H battery case.
Open the battery case cover and lift up the rubber cap to expose the screw holes. Tighten
the screws with a screwdriver and mount the case to the unit. Be sure to tighten the screws
completely.
|Notes{
¡Do not pull strongly on the rubber cap.
¡Take care not to catch the connection cord between the battery case and the main unit.