Filter
Top Products
–82–
Setup Card Operations
Setup Card Data Operations
Operations to store setting data on setup cards and read out stored data are performed at the
SET UP CARD page of the setting menu.
|Note{
When operating the unit with a remote controller, the SET UP CARD page cannot be operated
from the unit.
Formatting setup cards
1 Set the MENU SET/OFF switch to SET. The page on which the previous setting menu oper-
ations were completed appears on the viewfinder screen. (When the menu is used for the
first time, the first page appears.)
2 Press the MENU switch repeatedly until the SET UP CARD page shown below appears.
(This operation can also be performed using the PAGEoUP/DOWN function.)