Filter
Top Products
20
21
Changes the detail gain level in
+ (up) direction
Changes the detail gain level in -
(down) direction
→
＊＊ ＨＤ ＤＴＬ／ＳＫＩＮ ＤＴＬ（ ２／２ ） ＊＊
ＳＫＩＮ ＤＥＴＡＩＬ ＳＷＩＴＣＨ
ＣＵＲＳＯＲ
ＳＫＩＮ ＧＥＴ
ＣＲＩＳＰ ＰＨＡＳＥ ＷＩＤＴＨ ＳＡＴＵ
ＭＥＭＯＲＹ ＳＥＬＥＣＴ
Ａ
Ｂ
ＺＥＢＲＡ ＳＷＩＴＣＨ
ＥＦＦＥＣＴ ＭＥＭＯＲＹ
ＯＦＦ
ＯＦＦ
Ａ＋Ｂ
Ａ
０
０
０
０
０
０
０
０
ＮＯ�
ＯＦＦ
ＯＮ／ＯＦＦ Ｈ
９６０
Ｖ
２７０
( indicates factory default settings.)
Enables or disables control of
skin tone detail in HDTV video
output.
Enables or disables the position
cursor that obtains the saturation
and color phase information for
controlling skin tone detail.
Sets horizontal cursor position.
Sets vertical cursor position.
Automatically obtains the
saturation and color phase
information from the cursor
position.
Cancels operation.
Automatically obtains
saturation and color phase
information from the cursor
position.
Discards the saturation and
color phase information
obtained from the cursor
position.
Changes memory locations
for saving the skin tone detail
settings (CRISP, PHASE,
WIDTH and SATURATION).
Removes very faint noise
components from detail
components in skin tone areas
in memory bank A.
Changes the color phase of skin
tone areas in memory bank A
in a range from 0 to 359 on a
vector display.
Expands the width of skin tone
areas in memory bank A in a
range from 0 to 255.
Changes the saturation of skin
tone areas in memory bank A in
a range of 0 to 255.
Removes very faint noise
components from detail
components in skin tone areas
in memory bank B.
Changes the color phase of skin
tone areas in memory bank B in
a range of 0 to 359 on a vector
display.
Expands the width of skin tone
areas in memory bank B in a
range from 0 to 255.
Changes the saturation of skin
tone areas in memory bank B in
a range from 0 to 255.
Adds a zebra pattern to the
Y signals of the PM output to
make areas subject to skin tone
detail effects easily visible.
Selects the memory bank to
which skin tone detail effects will
be added.
→
＊＊ ＳＤ ＤＥＴＡＩＬ ＊＊
ＤＥＴＡＩＬ ＳＷＩＴＣＨ
Ｖ ＤＥＴＡＩＬ
Ｈ ＤＥＴＡＩＬ
ＣＲＩＳＰ
ＰＥＡＫ１
ＰＥＡＫ２
ＬＥＶＥＬ ＤＥＰＥＮＤＥＮＴ
ＤＡＲＫ ＤＥＴＡＩＬ
ＯＮ
ＯＦＦ
３
５％
１
５
０
３．１７Ｍ
( indicates factory default settings.)
Enables or disables changes in
contour enhancement (hard/soft)
level of SDTV video output.
Adjusts the amount of vertical
detail.
Adjusts the amount of horizontal
detail.
Sets the maximum amplitude of
the very faint noise components
that are removed from detail
components.
Selects one of the two contour
correction frequency bands
(boost frequency or peak
frequency). Changes the contour
width.
Selects one of the two contour
correction frequency bands
(boost frequency or peak
frequency). Changes the contour
width.