Filter
Top Products
20
21
Lowers the detail in dark areas.
It adjusts the level.
→
＊＊ ＳＹＳＴＥＭ （ １／２ ） ＊＊
ＲＥＴＵＲＮ１
ＲＥＴＵＲＮ２
ＲＥＴＵＲＮ３
ＲＥＴＵＲＮ４
ＲＥＴＵＲＮ・ＤＥＬＡＹ
ＤＯＷＮ ＣＯＮＶＥＲＴ ＭＯＤＥ
ＵＰ ＣＯＮＶＥＲＴ ＭＯＤＥ
ＨＤ ＣＯＬＯＲ ＢＡＲ
ＰＡＴＨＯ
ＳＤＩ３－４ ＯＵＴ
ＨＤ ＳＤＩ１
ＨＤ ＳＤＩ２
ＨＤ ＳＤＩ１
ＨＤ ＳＤＩ２
ＮＯＲＭＡＬ
ＳＣ
ＡＲＩＢ
ＯＦＦ
ＰＭ
ＳＣ
( indicates factory default settings.)
Sets the input allocations of
return signal 1.
Sets the input allocations of
return signal 2.
Sets the input allocations of
return signal 3.
Sets the input allocations of
return signal 4.
Selects whether a RET display
video will be delayed by 1 F
(NORMAL) or by the shortest
possible period (SHORT).
Selects the down-conversion
system for video output from SD
SDI and VBS.
Selects the up-conversion
system for videos used as SD
SDI and VBS return videos.
Select the color bar signals to be
output from the HD/SD SDI OUT
connectors and VBS connector
when “BAR” has been selected
on the operation panel of the
ROP.
When they are output in VBS
or SD format, color bars in HD
format are output in the mode
specified with
DOWNCONVERT MODE.
75 % full field color bar
Color bar based on the
SMPTE standard
ARIB multi-format color bar
Color bar based on the EIAJ
standard
Split field color bar
75 % full field color bar placed
in an area with a 4:3 aspect
ratio.
(Displayed 40 % gray outside
the area.)
Color bar based on the
SMPTE standard that is
placed in an area with a 4:3
aspect ratio.
(Displayed 40 % gray outside
the area.)
Color bar based on the EIAJ
standard that is placed in an
area with a 4:3 aspect ratio.
(Displayed 40 % gray outside
the area.)
Select ON/OFF for the
pathological signals.
Selects the signals output from
the 3rd and 4th HD/SD SDI
signal output connectors on a
CCU.