Filter
Top Products
22
23
→
＊＊ ＳＹＳＴＥＭ （ ２／２ ） ＊＊
ＨＤ Ｈ ＰＨＡＳＥ
ＳＤ Ｈ ＰＨＡＳＥ
ＳＤ－ＨＤ Ｖ
ＭＩＣ１
ＭＩＣ２
ＧＡＩＮ ＡＭＰ
６０dB
６０dB
０dB
０dB
０Ｈ
０
０
( indicates factory default settings.)
Adjusts the horizontal phase of
HD SDI video for the genlock
reference phase.
Adjusts SD horizontal sync
phase.
Set the vertical phase of the
HDTV output in relation to the
SDTV output.
Sets the vertical phase to the
same phase.
When the field frequency is
59.94 Hz, the phase advance
is 90H.
When the field frequency is 50
Hz, the phase advance is 75H.
The SDTV signals are delayed
and set in-phase with the
HDTV signals.
• When the setting of this item
is set to “0H” or “ADVANCE”
while the field frequency is
50 Hz, images in SD format
are delayed by 1 frame + 75
lines only when letterbox is
selected for DOWNCONVERT
MODE.
For the relationship with the
sync phase, refer to Operating
Instructions <Operations and
Settings> of AK-HCU200.
Performs coarse adjustment of
MIC1 gain.
Makes fine adjustments of the
MIC1 gain.
Makes coarse adjustments of
MIC2 gain.
Makes fine adjustments of MIC2
gain.
→
＊＊ ＦＵＮＣＴＩＯＮ ＊＊
ＡＬＣ ＬＥＢＥＬ
ＡＬＣ ＳＰＥＥＤ
ＡＬＣ ＷＩＮＤＯＷ
ＡＬＣ ＰＥＡＫ
ＡＬＣ ＲＡＮＧＥ
ＡＳＵ ＳＥＴＵＰ
ＡＳＵ ＲＥＦ ＦＩＬＥ
ＡＳＵ ＭＡＳＴＥＲ ＰＥＤ ＳＥＴ
ＡＳＵ ＦＩＬＴＥＲ
ＴＡＬＬＹ ＧＵＡＲＤ
５０
１５
１
６０
ＮＯＲＭＡＬ
ＯＵＴ ＦＵＬＬ
ＦＡＣＴＯＲＹ
２．０％
ＲＥＦ
ＯＦＦ
( indicates factory default settings.)
Adjusts the auto iris level of the
lens iris.
Sets the feedback speed of the
auto iris.
Feedback speed drops as the
numbers increase.
Sets the image detection area
window for the auto iris.
Sets the ratio between the
average and peak values of auto
iris image detection.
Sets the correction range for
adjustments of the iris level
using the IRIS knob to move the
iris lever <IRIS ( )> in auto
iris mode.
Selects the auto setup mode
setting.
Selects the file to be referenced
when auto setup has been
started.
Sets the position where the
master pedestal is to be
converged when auto setup is
started.