Filter
Top Products
Advanced (Recording pictures)
Item ' Description of settings
The flash is automatically activated when the recording conditions make it
_-A: AUTO
necessary.
The flash is automatically activated when the recording conditions make it
_-A@: necessary.
It is activated once before the actual recording to reduce the red-eye
AUTO/Red-eyereduction* phenomenon (eyes of the subject appearing red in the picture) and then
activated again for the actual recording.
• Use this when you take pictures of people in low lighting conditions.
_.: Forced ON The flash is activated every time regardless of the recording conditions.
_.@: • Use this when your subject is back-lit or under fluorescent light,
Forced ON/ • The flash setting is set to [_. @] only when you set [PARTY] or
Red-eye [CANDLE LIGHT] in scene mode. [P47)
reduction X
If you take a picture with a dark background landscape, this feature will slow
_S@: the shutter speed when the flash is activated so that the dark background
Slow syncJ landscape will become bright. Simultaneously it reduces the red-eye
Red-eye phenomenon.
reduction _ • The flash setting is set to [_S@] only when you set
[NIGHT PORTRAIT], [PARTY], [CANDLE LIGHT] in scene mode (P47).
The flash is not activated in any recording conditions.
(_): Forced OFF • Use this when you take pictures in places where the use of the flash
is not permitted.
The flash is activated twice. The subject should not move until the second flash is
activated.
• Available flash settings by recording mode
The available flash settings depend on the recording mode.
(O: Available, --: Not available, O: Scene mode initial setting)
1";I 0 o o o [] o • o o
t_o o [] o • o o
n o • o o G:i o - o •
[] o • o o _ •
In---1o • o o r_ o - o •
[] • D •
[] • - o o [] •
• - o [] •
[] • [] • o
[] o - o • _1 • - o o
[] • o o [] •
[] o o • [] o - o •
When [_-A] is selected, [hCA], [I,_A@] or [I,_S@] is set depending on the type of subject and
brightness.
40 VQT1M97