Filter
Top Products
Connecting to other equipment
• Connection in the PTP mode (Windows ® XP, Windows Vista ® and Mac OS X only)
Set [USB MODE] to [PictBridge(PTP)].
Data can now be read only from the card into the PC.
• When there are 1000or more pictures ona card, the pictures may not be imported inthe PTP mode.
If you connect the camera to a printer supporting PictBridge, you can select the pictures to
be printed out and instruct that printing be started on the camera's LCD monitor.
Preparations:
Turn on the camera and the printer.
Remove the card before printing the pictures in the built-in memory.
Perform the print quality and other settings at the printer before printing the pictures.
Connect the camera to a printer via the USB connection cable (_
(supplied).
@ USB connection cable (supplied)
• Check the directions ofthe connectors, and plug them straight in or unplug them straight out.
(Otherwise the connectors may be bent out of shape which will cause trouble.)
@ Align the marks, and insert.
© AC adaptor (DMW-AC5PP; optional)
• Use a battery with a sufficient battery power or the AC adaptor (DMW-AC5PP; optional). Ifthe
remaining battery power becomes low while the camera and the printer are connected, the
status indicator blinks and the alarm beeps. If this happens during printing, stop printing at
once. If not printing, disconnect the USB connection cable.
• When the camera is connected to the printer, the cable disconnect prohibit icon [_] appears.
Do not disconnect the USB cable while [€_] is displayed.
_ Press A/T to select and then
[PictBridge(PTP)],
press [MENU/SET].
VQT1M97 85