Filter
Top Products
O_e_
Check that the exposure is correctly compensated. (P45)
Set auto bracket (P46), [HI-SPEED BURST] (P52) in scene mode or [BURST] (P65) of the
[REC] mode menu to [OFF].
• The focus range varies depending on the recording mode.
Set to the proper mode for the distance to the subject.
• The subject is beyond the focus range of the camera. (P30)
• There is camera shake (jitter) or the subject is moving slightly. (P31)
The shutter speed becomes slower when pictures are taken in dark places so hold the
camera firmly with both hands to take the pictures. (P27)
When taking pictures at a slow shutter speed, use the self-timer. (P44)
• Is the number of recordable pictures 2 or less?
• Is the ISO sensitivity high or the shutter speed slow?
(ISO sensitivity is set to [AUTO] when the camera is shipped. Therefore, when taking pictures
indoors etc. noise will appear.)
Decrease the ISO sensitivity. (P61)
Set [COLOR MODE] to [NATURAL]. (P66)
Take pictures in bright places.
• Has [HIGH SENS.] or [HI-SPEED BURST] in the scene mode been set? If so, the resolution of the
recorded picture decreases slightly because of high sensitivity processing, but this is not a malfunction.
• If recording under fluorescent light, the brightness or the hue may change slightly when the shutter speed
becomes fast. This occurs due to the characteristics of fluorescent light. It is not a malfunction.
• This is a characteristic of CCDs, and it appears when the subject has a
bright part. Some unevenness may occur in the surrounding areas, but
this is not a malfunction.
It is recorded in motion pictures but is not recorded on still pictures.
• It is recommended that you take pictures while taking care not to expose
the screen to sunlight or any other source of strong light.
• Are you using a MultiMediaCard? This unit does not support MultiMediaCards.
When you set the picture quality to [3%_,] or [3_9], we recommend using a high-speed card
with "10MB/s" or greater displayed on the package.
• Depending on the type of the card, recording may stop in the middle.
VQT1M97 99