Panasonic DMC-FS3 Digital Camera User Manual


 
Connecting to other equipment
Do not use any other USB connection cables except the supplied one.
Turnthecameraoff beforeconnectingor disconnectingthe ACadaptor(optional:DMW-AC5PP).
Before inserting or removinga card turn the camera off,and disconnect the USB connection cable.
Youcannot switch between the built-in memory and the card while the camera is connected to
the printer. Disconnect the USB connection cable, insert (or remove) the card and then connect
the USB connection cable to the printer again.
Press <1/1_ to select the picture and then press
[MENU/SET].
The message disappears inabout 2 seconds.
_ Press to [PRINT START] press
select and then
[MENU/SET].
Refer to P87 for the items which can be set before starting to print
the pictures.
Press [MENU/SET] to cancel printing halfway.
Disconnect the USB connection cable after printing.
Press •.
_ Press •IT to select item and then
an
press [MENU/
SET].
Ifthe print check screen has appeared, select [YES], and print
the pictures.
Item ' Description of settings
Multiple pictures are printed at one time.
Press A/T/</I_ to select the pictures, and then When [DISPLAY] is
[MULTI SELECT] pressed, [,f_,]appears on the pictures to be printed. (When [DISPLAY] is
pressed again, the setting is canceled.)
After the pictures have been selected, press [MENU/SET].
[SELECT ALL] Prints all the stored pictures.
[DPOF PICTURE] Prints the pictures set in [DPOF PRINT] only. (P80)
[FAVORITE]_ Prints the pictures set as favorites only. (P79)
Only when [FAVORITE] is at [ON] and when there are pictures set as favorites. (P79)
86 VQT1M97