A dvanced (Recording pictures)
White balance fine adjustment
You can adjust the hue to match the water depth and the weather.
1 Press • [F_] three times to display _ [WB ADJUST.].
2 Press •/1_ to adjust the white balance.
• [RED]: Press when the hue is bluish.
I_ [BLUE]: Press when the hue is reddish.
• Ifyou adjust the white balance, [Eft] appears on the screen in red
or blue.
• Select [0] if you do not want to finely adjust the white balance.
• The focus range becomes the same as macro mode. [5 cm (0.17 feet) (Wide)/50 cm (1.64 feet)
(Tele) to z] (DMC-FS5)/[5 cm (0.17 feet) (Wide)/30 cm (0.99 feet) (Tele) to z] (DMC-FS3)
Slide the [REC]/[PLAYBACK] selector switch to [l_3/It_l], and then
press [MODE].
_ Press A/_' to select and then
[MOTION PICTURE], press [MENU/SET].
_ Press the shutter button to focus
halfway
and then press it fully to start recording.
(A_Audio recording
• The available recording time (B)is displayed on the top
right and the elapsed recording time © is displayed on
the bottom right of the screen.
• After pressing the shutter button fully, release it straight
away. Ifthe button is held down, the sound will not be
recorded for a few seconds when recording starts.
• When thesubject isfocused,thefocus indicationlights.
• The focus and zoom are fixed to the setting when
recording starts (the first frame).
• The audio is also recorded simultaneously from the
built-in microphone on this unit. (Motion pictures
cannot be recorded without audio.)
Press the shutter button fully to stop recording.
• If the built-in memory or the card becomes full inthe middle of recording, the camera
stops recording automatically.
Press [MENU/SET].
VQT1M97 55