Filter
Top Products
Connecting to other equipment
Double-click on [Removable Disk] in [My Computer].
• When using a Macintosh, tile drive is displayed on the desktop. CLUMIX", "NO NAME"
or "Untitled" is displayed.)
_ Double-click [DCIM] folder.
Using a drag-and-drop operation, move the pictures you want to
acquire or the folder storing those pictures to any different folder on
the PC.
• Disconnecting the USB connection cable safely
• Proceed with the hardware removal using 'Safely Remove Hardware' on the task tray of the
PC. If the icon is not displayed, check that [ACCESS] is not displayed on the LCD monitor of the
digital camera before removing the hardware.
• Do not use any other USB connection cables except the supplied one.
• Turnthe camera off before connecting or disconnecting the AC adaptor (optional: DMW-AC5PP).
• Before inserting or removing a card, turn the camera off and disconnect the USB connection
cable. Otherwise, data may be destroyed.
• With the Mac OS Xvl 0.2 or an earlier operating system, set the Write-Protect switch of the
SDHC memory card to the [LOCK] position when importing pictures from an SDHC memory
card.
• Viewing the contents of the built-in memory or card using the PC (folder
composition)
O Folder number
_ File number
JPG: Pictures
MOV: Motion pictures
_P1000001.JPG MlSC: DPOF print
L_ L_ Favorite
_i 11111!09291Jji_
101 PANA]
A new folder is created when pictures are taken in the following situations.
• After [NO.RESET] (P23) in the [SETUP] menu has been executed
• When a card containing a folder with the same folder number has been inserted (Such as when
pictures were taken using another make of camera)
• When there is a picture with file number 999 inside the folder
84 VQT1M97