Filter
Top Products
Advanced (Recording pictures)
: AUTO/Red-eye reduction 1
The flash is automatically activated when
the recording conditions make it necessary.
It is activated once before the actual
recording to reduce the red-eye
phenomenon (eyes of the subject
appearing red in the picture) and then
activated again for the actual recording.
• Use this when you take pictures of
people in low lighting conditions.
_: Forced ON
The flash is activated every time regardless
of the recording conditions.
• Use this when your subject is back-lit
or under fluorescent light.
_: Forced ON/Red-eye reduction 1
• The flash setting is set to Forced ON/
Red-eye reduction only when you set
[PARTY] (P47) or [CANDLE LIGHT]
(P48) in scene mode.
: Slow sync.IRed-eye reduction 1
If you take a picture with a dark background
landscape, this feature will slow the shutter
speed when the flash is activated so that
the dark background landscape will
become bright. Simultaneously it reduces
the red-eye phenomenon.
• You can set Slow sync./Red-eye
reduction only in [NIGHT PORTRAIT]
(P46), [PARTY] (P47) and
[CANDLE LIGHT] (P48) in scene mode.
[] : Forced OFF
The flash is not activated in any recording
conditions.
• Use this when you take pictures in
places where the use of the flash is not
permitted.
1 The flash is activated twice. The
subject should not move until the
second flash is activated.
• Available flash settings by recording
mode
The available flash settings depend on the
recording mode.
(©: Available,--: Not available, O: Initial
setting)
171 0 0 0 0
[] _ 0,2 _,2 0
o o o o
l_ o o o o
[] o • o o
o ® o o
• o o o
[] • - o o
[] • - o
e
[] o - o •
[] • o o
o o e
- • o o
- • o o
o - o o
r_ •
e
[] •
• o
J_l • - o o
2 •
o - o •
[] o
#2 It becomes Forced ON [O], when the
backlight compensation function is
activated.
• The flash setting may change if the
recording mode is changed. Set the flash
setting again if necessary.
36
VQT1C14